Well I have been convinced to purchase a DVD/CD printer burner for the business.
I have a Mac shop and the budget is small so I opted for the 50 disc capability of the Mircoboard versus the 20 disc capabilities of the Primera. I thought it was worth the extra couple of hundred for the added disk capacity.
I am very excited. I was asked a trade show last year if I do DVD duplication. My answer was "No, I'm not in that business."
The floor rep followed up with "How many DVD do you make per customer." My answer was on average 20 disks per client.
I heard it leave my lips and I realized - I am in that business.
It took me almost a year to let go of the money and purchase this robotic desktop publishing unit from Microboards.
I'll give the blow by blow of the set up install and first print and burn for my shop.
I'm in a hurry for the next 50 disks to be published so I'll try to make this concise.
I was able to find a GX2-1000 on-line. It was shipped in two days and arrived while I was out of town. Lucky for me I had someone in the office to receive it.
I got it out of the box. A largish 3 foot box and attached the catch tray and installed the ink cartridge first.
This point is very clear in the fine print- Install the ink cartridge before powering on the GX-2! The print is regular 12 pt but not until page 7 do they have cartridge instructions.
Great it looks fine I have read the four or five important pages of instructions and begin the install of software. Again in the fine print it mentions to install the software before connecting the Microboards to my computer.
I install my PowerPC software. There is an option for the Intel Mac as well. I have both in the office so this is useful.
There is one thing missing in my opinion.
There is no template for the disk face label. I found suggestions on the internet. I was able to use a two CD face label from
http://ww.worldlabel.com I used the OL1200.pdf label. I opened it in PhotoShop and cropped it down to the suggested 120mm x 120mm.
I was able to successfully use this label to do a print test on a coaster disk in the office. The cheap-skate wouldn't let me make a coaster.
The fine print also suggests not to print labels on blank disks. Burn then print!
Ok this label adventure took me a couple of hours with normal office interruptions.
The next thing is to power up the Microboards unit and the computer with the USB connection in place.
System prefs set up is next. Choose the printer/fax and "add" the GX system. Register the unit. It took about 2 minutes for the two emails for the activation number to arrive.
I was able to register and do a page / printer set up easily. During the set up it is important to do a calibration print.
It is a little disconcerting to think about this calibration. My question is "Does it need to be done every time or just on the initial set up on this one computer?" (More on that later)
Today I have created a label for a need DVD an have the original DVD. I am going to use the copy DVD/CD option since I have a DVD drive on the computer I'll just use this option to make the dups.
Stacking the disks is a little odd but it works.
4 or 5 disk will lay flat in the feeding whole on top. Then 40 or so will lay tipped slightly in between the pins sticking out of the top of the unit. It looks like it might not work but my test assured me it does. Of course Microboards wouldn't sell a bad design. Sometimes you cannot believe your eyes.
Other than the missing template it was relatively quick to install software and burn and print disks with the GX-2-1000
I figure it will take about two hours of attention to get up and running. I include a significant test in this two hours.
Hope this might help someone out there wanting more input on their decision on a DVD publishing system.
Cheers!
Thursday, October 25, 2007
Monday, August 20, 2007
XD to FCP first attempt
I have been reading a lot of posts about FCP an XDCam and there was always something missing in the "how-to" of XD to timeline.
It seems easier to understand when you have it front of you. I thought I'd try to narrate the blow-by-blow for those looking for more detail.
The background details:
I used a G5 Dual 2.5GHz with 4.5gig RAM with FCP v6 from the studio 2 suite.
Shot 1080 60I on a Sony PDW330
It was 2:30 in the afternoon.
Days before the test....
The XDCam camera comes with a disk. None of the software on the disk was useable for us Mac G5 users.
In my haste on various user groups I missed the important what to download from the Sony site.
I know from the topic threads that there was something to download but It was not apparent on the Sony site - I visited for a an hour trying to find the right download. I have a trash bin of .exe and zip files not usable on the G5.
As is normal on the web I failed to follow through on what I was looking for and left this detail to the last minute during the test. Certainly not anyone to blame but myself.
2:30Pm test day
I opened a new project and used the easy setup to load preset for the XDCam 1080I project.
This is when I realized my "what was I looking for" web misadventure. I plugged in the iLink or firewire cable to the camera and the computer. It did not show me a drive on the desktop as I expected nor did I get an import option identified as XDCam. My computer system disk utilities saw the firewire cable and correctly identified the camera connected.
I'm now stuck. FCP was not "seeing" the camera or the files on the disk.
Time to hit the web for answers.
I finally found a post that linked to
www.sonybiz.net/xdcam for the download of the correct file for FCP use.
The XDCam HD cinealta user group at DVinfo.net was very helpful for this info.
3:10pm
I had the software installed. I had my project already set now for the recommended procedure.
Before I launched FCP Plug in the iLink or firewire cable to the camera.
On the desktop I see an Icon of a XDCam disk with a numeral for a name.
Select the icon and "apple" + "I" for the information box. Use this box to rename the disk.
This is for your sanity so pick a short descriptor.
After renaming the disk, eject it from the desktop. This will eject it from the camera. Reinsert it.
The desktop icon will reappear with the new name. Now you are ready for the FCP import.
Launch FCP, go to the Menu "File" - "Import"
now I see the XDCam option. small celebration again.
When I choose the XDCam option the new transfer software launches.
The first time there are set up options
Things to consider for your set up --Choose wisely grasshopper.--
1. Lo rez proxy and data file destination and storage- lives on your computer til delete do you part.
2. full rez file destination and storage- bandwidth is critical for these files.
3. export temporary files - not big files and temporary only
After selecting your setup options the software quickly populate the window to mirror the XDCam files in the deck.
another celebration.
This software is useful for a producer or a paper edit. I saw a question posted about what to give a producer with a Mac.
My guess is that you can duplicate the low rez proxy and data file home with the Mac producer.
I imported a few files and timed it. It took nearly 2/3 real time to transfer the data. It runs in the background so it feels quick.
I like the way the software allows you to keep working on selecting or trimming clips.
by 4:12pm I had edited a 1:00 sequence with the new XDCam footage.
I was ready to export.
More on the export next time.
Cheers!
It seems easier to understand when you have it front of you. I thought I'd try to narrate the blow-by-blow for those looking for more detail.
The background details:
I used a G5 Dual 2.5GHz with 4.5gig RAM with FCP v6 from the studio 2 suite.
Shot 1080 60I on a Sony PDW330
It was 2:30 in the afternoon.
Days before the test....
The XDCam camera comes with a disk. None of the software on the disk was useable for us Mac G5 users.
In my haste on various user groups I missed the important what to download from the Sony site.
I know from the topic threads that there was something to download but It was not apparent on the Sony site - I visited for a an hour trying to find the right download. I have a trash bin of .exe and zip files not usable on the G5.
As is normal on the web I failed to follow through on what I was looking for and left this detail to the last minute during the test. Certainly not anyone to blame but myself.
2:30Pm test day
I opened a new project and used the easy setup to load preset for the XDCam 1080I project.
This is when I realized my "what was I looking for" web misadventure. I plugged in the iLink or firewire cable to the camera and the computer. It did not show me a drive on the desktop as I expected nor did I get an import option identified as XDCam. My computer system disk utilities saw the firewire cable and correctly identified the camera connected.
I'm now stuck. FCP was not "seeing" the camera or the files on the disk.
Time to hit the web for answers.
I finally found a post that linked to
www.sonybiz.net/xdcam for the download of the correct file for FCP use.
The XDCam HD cinealta user group at DVinfo.net was very helpful for this info.
3:10pm
I had the software installed. I had my project already set now for the recommended procedure.
Before I launched FCP Plug in the iLink or firewire cable to the camera.
On the desktop I see an Icon of a XDCam disk with a numeral for a name.
Select the icon and "apple" + "I" for the information box. Use this box to rename the disk.
This is for your sanity so pick a short descriptor.
After renaming the disk, eject it from the desktop. This will eject it from the camera. Reinsert it.
The desktop icon will reappear with the new name. Now you are ready for the FCP import.
Launch FCP, go to the Menu "File" - "Import"
now I see the XDCam option. small celebration again.
When I choose the XDCam option the new transfer software launches.
The first time there are set up options
Things to consider for your set up --Choose wisely grasshopper.--
1. Lo rez proxy and data file destination and storage- lives on your computer til delete do you part.
2. full rez file destination and storage- bandwidth is critical for these files.
3. export temporary files - not big files and temporary only
After selecting your setup options the software quickly populate the window to mirror the XDCam files in the deck.
another celebration.
This software is useful for a producer or a paper edit. I saw a question posted about what to give a producer with a Mac.
My guess is that you can duplicate the low rez proxy and data file home with the Mac producer.
I imported a few files and timed it. It took nearly 2/3 real time to transfer the data. It runs in the background so it feels quick.
I like the way the software allows you to keep working on selecting or trimming clips.
by 4:12pm I had edited a 1:00 sequence with the new XDCam footage.
I was ready to export.
More on the export next time.
Cheers!
Friday, August 17, 2007
Reflectmedia on the timeline
I now have a quick update on the timeline portion of the test of my new reflecmedia flexiable bkg, light-ring and dimmer.
I'm using Final Cut Pro 6 the new Studio 2 version on a G5 Dual 2.33MHz
The Demo disk did not have a Mac version of the reflectmedia free plug-in "mattenee"
I emailed them about a Mac compatible plug-in. They were prompt to reply and very helpful. They sent me a demo plug-in that they are no longer supporting. It is too bad because...
After I installed the plug-in I was able to drop in the mattenee filter and viola the background was gone.
Of course the reflecmedia logo was pasted everywhere but it worked easily and quickly.
I thought, ok I can't use their plug-in but I can use the green screen key filter. I tweeked the settings here and there in a matter of moments I was able to get a very nice key.
I spent 10 mintues with the bkg and light-ring for a very easy useful chroma key effect.
I'll post a video sample of the raw footage andthe NLE key.
I have every expectation that when I have to use the Reflecmedia system for a client it will a time saver.
AS we know time is money.
Cheers!
-Nicky
I'm using Final Cut Pro 6 the new Studio 2 version on a G5 Dual 2.33MHz
The Demo disk did not have a Mac version of the reflectmedia free plug-in "mattenee"
I emailed them about a Mac compatible plug-in. They were prompt to reply and very helpful. They sent me a demo plug-in that they are no longer supporting. It is too bad because...
After I installed the plug-in I was able to drop in the mattenee filter and viola the background was gone.
Of course the reflecmedia logo was pasted everywhere but it worked easily and quickly.
I thought, ok I can't use their plug-in but I can use the green screen key filter. I tweeked the settings here and there in a matter of moments I was able to get a very nice key.
I spent 10 mintues with the bkg and light-ring for a very easy useful chroma key effect.
I'll post a video sample of the raw footage andthe NLE key.
I have every expectation that when I have to use the Reflecmedia system for a client it will a time saver.
AS we know time is money.
Cheers!
-Nicky
Greenscreen Reflecmedia my review
I thought I'd offerr my blow by blow on setting up and using some new equipment.
I saw some tech podcast highlight the reflecmedia and was really wowwed. The marketing worked cuz I bought a flex and light kit. It came with a small gadget bag to hold the light-ring, dimmer and the power cables. The flexible chromaflex fits in the large black bag under the other stuff in the photo-see my photos.
The bag was a surpise bonus for me. I snapped a still shot with the flash on so the reflective qualites of the background can be easily seen. This shiny silver will be green when the light ring - mine is green - is mounted to the lens of the camera and is turned on. It really is quick and easy to set up. I unpacked the light-ring and mounted it to my 82mm lens thread, turned it on and got instant green screen. I did not have to light the screen.
I didn't even light my subject during the trial run. I was able to put it on the NLE timeline and drop out the screen with little effort. And no lighting the subject or bakcground. I'm use to a more time on the lighting and using a waveform/vector scope to get the bkg lit jsut right. Not anymore. I set up a light for the subject and let it spill on reflecmedia background in the second test. I thought it would wash out the green reflection and skew the results on the timeline. As a second test I light the subject and did not let it spill on the reflecmedia bkg.
I have yet to put it in the NLE timeline to see the results but in the playback there was no difference to my eye in the green background's even lighting. I will post the two NLE results soon. For set up and lighting it took me less than 12:00 to get an image ready for green screen compositing. I didn't time it but I did look at the clock after three or four test records and thirty minutes had gone by. More on the NLE resluts with the reflecmedia light-ring and bkg.
more to come on the post side
-Nicky
I saw some tech podcast highlight the reflecmedia and was really wowwed. The marketing worked cuz I bought a flex and light kit. It came with a small gadget bag to hold the light-ring, dimmer and the power cables. The flexible chromaflex fits in the large black bag under the other stuff in the photo-see my photos.
The bag was a surpise bonus for me. I snapped a still shot with the flash on so the reflective qualites of the background can be easily seen. This shiny silver will be green when the light ring - mine is green - is mounted to the lens of the camera and is turned on. It really is quick and easy to set up. I unpacked the light-ring and mounted it to my 82mm lens thread, turned it on and got instant green screen. I did not have to light the screen.
I didn't even light my subject during the trial run. I was able to put it on the NLE timeline and drop out the screen with little effort. And no lighting the subject or bakcground. I'm use to a more time on the lighting and using a waveform/vector scope to get the bkg lit jsut right. Not anymore. I set up a light for the subject and let it spill on reflecmedia background in the second test. I thought it would wash out the green reflection and skew the results on the timeline. As a second test I light the subject and did not let it spill on the reflecmedia bkg.
I have yet to put it in the NLE timeline to see the results but in the playback there was no difference to my eye in the green background's even lighting. I will post the two NLE results soon. For set up and lighting it took me less than 12:00 to get an image ready for green screen compositing. I didn't time it but I did look at the clock after three or four test records and thirty minutes had gone by. More on the NLE resluts with the reflecmedia light-ring and bkg.
more to come on the post side
-Nicky
Monday, August 13, 2007
Globe shooter
I was invited by some random chance to join a NING group by the name of globe shooters.
I think i might be fun to get to know a new group of guys.
That is one thing about being the only LATINA doing this in my area. Everyone knews of me.
Being a chikc in this industry has some advantages. My height is not one of them.
See you in the movies.
nicky in durham
I think i might be fun to get to know a new group of guys.
That is one thing about being the only LATINA doing this in my area. Everyone knews of me.
Being a chikc in this industry has some advantages. My height is not one of them.
See you in the movies.
nicky in durham
Saturday, July 14, 2007
Mexico Take 2
After the last trip ;
We logged and transcribed the footage.
I found a new reason to dislike homeland security
U.S. passports don't mean US Customs or immigration will be nice to you
Documentary making is a long long road
We shot for almost 30 days for the first trips. IT took 20 days to edit and 20 hours to get the right DVD exported.
The University lecture circuit was fun and a lot of work. The Doc was presented in The Best Latino Studies in the country. Latino Community advocates reacted one way and Latinos reacted another to the content of the Doc.
Going to LA was the best for me. I love the radical Chicanos out there.
After seeing Milagros Made In Mexico on the big screen dozens of times I know there are areas to "fix."
We took another trip to Mexico to get more B-roll. This trip to GTO Mexico was not as charmed.
Five days in to ten days of shooting my batteries quit working. All 6!
I was as inconsolable as a cranky infant.
Luckily we had invited a Mexican videographer along to PA for the trip.
Laura was quite useful but eventually she was bored and stopped being useful.
I had more luggage and bags to pack and haul. Never have I ever been burdened so much by a PA.
The lucky aspect was that we brought her Panasonic pd100 DV camera.
She was able to get a few pick up exteriors. I'm not sure I'll be able to use the shots.
I'm hoping I can match the color to my camera.
I took the battery charger and batteries to an electronics shop in a smaller town. The fella was very nice and loaned me an extension cord while he tested the charger.
He tested it and determined that all 6 of my batteries died at the same time because the charger was working properly. I have yet to confirm this. I suspect that the charger did something to all my batteries during the last charge cycle. Anyway. I was stuck.
No batteries and limited shooting. And we still had three more subjects to visit!
I ended up using my very small $200 dollar minDV camera. I bought it to use as a playback deck on this trip. My JVCDV500 is very finicky about playing back tapes. The camera was a very pail replacement.
Laura was generally too slow to capture images and most of the shots I could have captured slipped away by the time she got set up. I was fit to be tied. I wanted to go home. I missed so many good shots!
The only thing I could have done to avoid loosing all my batteries was to find a battery dealer in Mexico. We where not there long enough nor close enough to Mexico City. I will rethink by battery backup issue.
I have yet to log or transcribe the new footage. I still l have to reedit the shot.
I'll let you know how the Spring 2008 shoot goes.
We logged and transcribed the footage.
I found a new reason to dislike homeland security
U.S. passports don't mean US Customs or immigration will be nice to you
Documentary making is a long long road
We shot for almost 30 days for the first trips. IT took 20 days to edit and 20 hours to get the right DVD exported.
The University lecture circuit was fun and a lot of work. The Doc was presented in The Best Latino Studies in the country. Latino Community advocates reacted one way and Latinos reacted another to the content of the Doc.
Going to LA was the best for me. I love the radical Chicanos out there.
After seeing Milagros Made In Mexico on the big screen dozens of times I know there are areas to "fix."
We took another trip to Mexico to get more B-roll. This trip to GTO Mexico was not as charmed.
Five days in to ten days of shooting my batteries quit working. All 6!
I was as inconsolable as a cranky infant.
Luckily we had invited a Mexican videographer along to PA for the trip.
Laura was quite useful but eventually she was bored and stopped being useful.
I had more luggage and bags to pack and haul. Never have I ever been burdened so much by a PA.
The lucky aspect was that we brought her Panasonic pd100 DV camera.
She was able to get a few pick up exteriors. I'm not sure I'll be able to use the shots.
I'm hoping I can match the color to my camera.
I took the battery charger and batteries to an electronics shop in a smaller town. The fella was very nice and loaned me an extension cord while he tested the charger.
He tested it and determined that all 6 of my batteries died at the same time because the charger was working properly. I have yet to confirm this. I suspect that the charger did something to all my batteries during the last charge cycle. Anyway. I was stuck.
No batteries and limited shooting. And we still had three more subjects to visit!
I ended up using my very small $200 dollar minDV camera. I bought it to use as a playback deck on this trip. My JVCDV500 is very finicky about playing back tapes. The camera was a very pail replacement.
Laura was generally too slow to capture images and most of the shots I could have captured slipped away by the time she got set up. I was fit to be tied. I wanted to go home. I missed so many good shots!
The only thing I could have done to avoid loosing all my batteries was to find a battery dealer in Mexico. We where not there long enough nor close enough to Mexico City. I will rethink by battery backup issue.
I have yet to log or transcribe the new footage. I still l have to reedit the shot.
I'll let you know how the Spring 2008 shoot goes.
Subscribe to:
Posts (Atom)
